輸出販売品目

製鉄及び環境機械設備

◆　高圧デスケーリングポンプ 
Type : Vertical Plunger Pump
Horizontal Plunger Pump
Centrifugal Pump
Pressure : 120～400Kg/cm²
Capacity : 100～6000 litter/min
Discharge Size : 2B～12B

◆　デスケーリングバルブ、 ガスバルブ

Product Line-up : Spray Valve, Check Valve, Overheat Blow-off Valve, By-pass Valve, ACC Shut-off Valve, others
Material : FC, SCPH, SF, SUS, SCS
Nominal Size : 2B～8B
Working Pressure : 120～400Kg/cm²
Slide Gate type Gas Valves
   Nominal Size : 20B～60B
   Working Pressure : 0.5Kg/cm²

◆　コークス排液処理デカンター
Processing Capacity : 0.2～45m³/HV
Motor Capacity : 2.2～90Kw
Driving Method : Pole Change- Motor with colonet gear reducer
Features : Low power consumption and maximum tar extraction rate

◆大型減速機、
コイル巻取払出リール設備
Application : Pay-off/Tension Reel for CAL, EGL, CGL, RCL
Type of Reel Drum : Wedge type, Pyramid type, Smooth surface type
Drum dia. : 762mmφ Max.
光通信関連機器材

◆　光コネクター研磨機

SEIKO INSTRUMENTS
   Model No. : OFL-12/OFL-12A
Applicable : Connector/Ferrule: SC, FC, ST, E-2000, MU, LC Connectors 2.5mm, 2.0mm and 1.25mm Ferrules
No. of work piece mountable : 12ea.(Max.16ea.)
SANKYO
   Model No. : SF-105/SF-106
Applicable Ferrule : 2.5mm,2.0mm and 1.25mm Ferrule
Production Capacity : 45sec. per one connector for PC R-20 polishing

◆フェルール加工資材
（研磨材、フィルム、極細ピアノ線、超硬ピンゲージ 他）

・Polishing Film
   Grain Size : 0.01μm～8.0μm
Grain Material : Fe2O3, Cr2O3, Sic, Al2O3, SiO2, C(Diamond)
・Micro Fine Piano Wire
   Size : φ60.0μm～φ250.0μm
R-Grade : ±1.0, ±0.5, ±0.15μm
S-Grade : ±0.10μm
・Pin Gauge (with Handle, without Handle)
   Size : φ0.040mm～φ5.000mm
Tolerance : ±0.3μm～±0.1μm
Length : 10～50mm
・Ring Gauge (Material: Sapphire)
   Size : φ1.2470mm～φ1.2510mm
φ2.4950mm～φ2.5025mm
Tolerance : ±0.15μm

◆各種光コネクターコンポーネント

Type : SC, FC, ST, MU, LC (Single Mode, Multi-Mode)
Core : Single, Duplex
Cable Dia. : 0.9, 1.6, 2.0, 2.4, 3.0mm
フランジ
SCタイプ　フェルール用
LCタイプ　フェルール用

材質 : ステンレス

◆ブランクフェルール
製品フェルール製造設備
ブランクフェルール製造（コンパウンド、混練、金型、射出成形、脱脂、焼成） 並びに製品フェルール製造（内径／外径／同軸研磨、仕上げ研磨、測定／検査）のための設備、 エンジニアリング、機器供給、操業／品質管理ノウハウ供与、並びに技術指導
　Blank Ferrule / Finished Ferrule Production Plant – Flow chart



Ferrule Production Line

◆　Wire Etching Machine
・Application
   To make tapered wire from a straight piano wire through etching process by nitric acid
・Specification
   Wire Tension : Tension Rollers
Roller up & down : Manual Operation
Wire Winding : By Geared Motor
Etching RPM Control : By Counter

◆　ID Grinding Machine
・Application
   To grind the hole diameter of ferrules, which are fixed in the split pipe, by the tapered wire
・Specification
   Spindle RPM : 5000
Wind & Rewind : AC servo motor
Power Direction Charge : By Electronic Clutch
Rewind Length Control : By Encoder & Counter
Wire Cutting Sensor : Proximity Photo Sensor

◆　Concentricity Grinding Machine
・Application
   To grind the outside diameter of ferrules to the level of concentricity
・Specification
   Type : Cylindrical Grinding for one by one
C/Time : 14 sec.
Grinding Margine : 50μm Max
Concentricity : 1.0μm
Yielding Rate : 80% Min

◆　Brushing Machine
・Application
   To polish bottom end of ferrules to make “R” for inserting flanges
・Specification
   Loading System : Loaded with Jig by 8pcs. at one time
Speed Control : By Inverter
Brush Rotation : Automatically Controlled by Timer
Brush Height Setting : By Manual Operation

◆　PC Polisher
・Application
   To polish “R” of top-end face of the ferrules
・Specification
   Work Feeding Method : Parts Feeder + Top/Bottom End face selection
Loading/
Unloading System		 : Automatic
Chucking : Diaphragm chuck
C/Time : 8 sec./pc
R.O.C : R 17.5 ±2.5
Offset : φ40μm Max
Mist Controller : Mounted